List Typical RAB OLPC Parameters(LST UTYPRABOLPC)

Function

Use this command to list the sub-flow OLPC parameters of a typical traffic RAB.

OLPC: Outer Loop Power Control. The OLPC algorithm adjusts the target values for the inner loop power control based on the communication quality, such as the Block Error Rate (BLER), Bit Error Rate (BER), and Frame Error Rate (FER) parameters. Thus, the minimum power can always meet the communication requirements.

Note

None.

Parameter

Parameter ID	Parameter Name	Parameter Description
QueryType	Query type	Meaning: Select query typical RAB condition type. GUI Value Range: QUERY_BY_RABINDEX, QUERY_BY_PROPERTY Actual Value Range: QUERY_BY_RABINDEX, QUERY_BY_PROPERTY Unit: None Default Value: QUERY_BY_RABINDEX Recommended Value: QUERY_BY_RABINDEX
RabIndex	Service parameter index	Meaning: Index number uniquely identifying the configuration of the typical service parameters. GUI Value Range: 0~99 Actual Value Range: 0~99 Unit: None Default Value: None Recommended Value: None
CNDomainId	CN domain ID	Meaning: This parameter specifies whether the service is a CS service or PS service. - CS_DOMAIN: Circuit Switched domain service - PS_DOMAIN: Packet Switched domain service GUI Value Range: CS_DOMAIN, PS_DOMAIN Actual Value Range: CS_DOMAIN, PS_DOMAIN Unit: None Default Value: None Recommended Value: None
TrafficClass	Traffic class	Meaning: Traffic class. There are four traffic classes: conversational, streaming, interactive, and background. GUI Value Range: CONVERSATIONAL, STREAMING, INTERACTIVE, BACKGROUND Actual Value Range: CONVERSATIONAL, STREAMING, INTERACTIVE, BACKGROUND Unit: None Default Value: None Recommended Value: None
MaxBitRate	Max rate[bit/s]	Meaning: Maximum bit rate of the typical traffic. GUI Value Range: 0~256000000 Actual Value Range: 0~256000000 Unit: bit/s Default Value: None Recommended Value: None
TrchType	Transport channel type	Meaning: This parameter specifies the type of uplink transport channel for the typical RAB. GUI Value Range: TRCH_DCH, TRCH_EDCH_2MS, TRCH_EDCH_10MS Actual Value Range: TRCH_DCH, TRCH_EDCH_2MS, TRCH_EDCH_10MS Unit: None Default Value: None Recommended Value: None
DelayClass	Delay Class	Meaning: Delay class number. Each delay class number indicates a specified delay time range of Iub transmission. GUI Value Range: 1~5 Actual Value Range: 1~5 Unit: None Default Value: None Recommended Value: None
LstFormat	Result list format	Meaning: This parameter indicates the result is listed horizontally or vertically. GUI Value Range: HORIZONTAL, VERTICAL Actual Value Range: HORIZONTAL, VERTICAL Unit: None Default Value: VERTICAL Recommended Value: VERTICAL

Example

To list the OLPC related configurations of the typical traffic RAB that has the following configuration:
- CN domain ID: PS_DOMAIN
- Traffic class: CONVERSATIONAL
- Max rate[bit/s]: 64000
- Transport channel type: TRCH_DCH
- Delay Class: 1
Execute the following command:
LST UTYPRABOLPC: QueryType=QUERY_BY_PROPERTY, CNDomainId=PS_DOMAIN, TrafficClass=CONVERSATIONAL, MaxBitRate=64000, TrchType=TRCH_DCH, DelayClass=1;
After the above operation, the result is shown as follows:

%%LST UTYPRABOLPC: QueryType=QUERY_BY_PROPERTY, CNDomainId=PS_DOMAIN, TrafficClass=CONVERSATIONAL, MaxBitRate=64000, TrchType=TRCH_DCH, DelayClass=1;%%
RETCODE = 0  Execution succeeded.

List Typical RAB OLPC Parameters
--------------------------------
                                 Service parameter index  =  15
                                   Service subflow index  =  0
                                  Transport channel type  =  TRCH_DCH
                                             Delay Class  =  1
                        Target value of service DCH_BLER  =  -20
           Maximum Number of E-DCH PDU retransfer[times]  =  
Edch Little Target Number of E-DCH PDU retransfer[times]  =  
                Maximum E-DCH SIR decrease step[0.001dB]  =  
 Edch Target Large Number of E-DCH PDU retransfer[times]  =  
                                           Traffic Class  =  CONVERSATIONAL
(Number of results = 1)

1 reports in total

---    END

Output Description

Refer to the parameter description of ADD UTYPRABOLPC.