Fine Optimization - Engineer´s

Madrid, Madrid, Spain
Blog for Engineers, Operators and students of telecom environment. If you have any doubt or suggestion, please don´t hesitate to contact me using my skipe: eng.emerson.eduardo.rodrigues

Friday, June 3, 2011

Verifying the UMTS Services - HUAWEI Equipment


This chapter describes how to verify that the UMTS basic services and the feature services that are enabled are normal. The basic services consist of voice service, CS streaming service, PS service, and mobility management service. Feature services consist of inter-RAT handover, HSDPA service, HSUPA service, 64QAM service, and MIMO service.

Prerequisites

  • The verification over the Iub, Iu-CS, Iu-PS, and Iur interfaces is successful. The verification over the Iur interface is mandatory only when the BSC6900 is connected to the RNC.
  • The UEs used for test are operational and are registered in the HLR.
  • You have logged in to the BSC6900 through the LMT.

Procedure

  1. Table 1 lists the procedure for verifying the basic services by testing the UE in the NodeB cells.

    NOTE:
    If the result of service verification cannot meet the expected result, start the following message tracing tasks: tracing over the UE, cell, and interfaces including Uu, Iu, Iub, and Iur (mandatory only in inter-RNC handover).
  2. Table 2 lists the procedure for verifying the feature services by testing the UE in the NodeB cells.

No comments:

Post a Comment